CREATIVE FLAKE EPOXY FLOORING

 

PREPARATION

Preparation is key to achieving a long lasting durable epoxy floor.

Good adhesion to the surface being coated is a priority.

If preparation is not carried out correctly, the system can separate from the substructure causing product failure.

 

If the surface has been previously painted or sealed, or has any oil or grease, acid etching, paint stripping, or grinding is recommended.

All cracks should be filled then the floor should be thoroughly cleaned.

 

Once the floor is prepared a Base primer is applied, this ensures the perfect surface for application.

 

Then the epoxy base coat and flake can be applied this takes aprox 12 hours to dry, and must be well ventilated.

 

After the the flake has been drying for aprox 12 hours the clear epoxy or sealer can be applied, 2 coats of clear epoxy or sealer are usually applied to give maximum protection to the surface, 72 hours drying time is recommended after final sealer coat before return to service.

 

MAINTENANCE

After final application allow 24 hrs before light foot traffic ( No shoes ) and 48 hrs for heavier traffic.

For cars allow 72 hrs minimum, this will vary depending on factors such as time of year.

Treat your epoxy flooring system carefully for up to six months by not dragging heavy items across the surface.

The more you look after the surface in the first few months, the longer it will last.

 

Sweep the floor on a regular basis with a soft broom, the more dirt and grit that is apparent can damage the surface.

Clean spills like oil and grease quickly without using abrasive cloths.

 

Applying these simple maintenance guidelines will keep your epoxy floor looking fresh and clean for years to come.

 

Qbcc_edited.jpg
facebook.jpg